MOUSETRAP POWERED CARS

A collection of all the hard-to-find parts and accessories in one package. Perfect for those who cannot use a kit and/or for those who want to design and build their own mousetrap racer from scratch. Includes top secret builder's guide filled with performance tips and tricks.... Read More

Victor brand mousetraps are the number one choice when it comes to building a record setting mouse trap powered vehicle. Victor mouse traps measuring 3-7/8 inches by 1-3/4 inches and come in a two-pack. Use one for testing and then save the other for race-day.... Read More

Stop gluing the mousetrap to the vehicle's frame! Now with Doc Fizzix's hold down bolts you can attach the mousetrap to your vehicle's frame in a less than permanent way so it can be removed, adjusted, and or even repositioned in order to fine tune your vehicle to perfection.... Read More

JET super glue is a very fast drying, instant cure, cyanoacrylate super glue that penetrates porous materials and dries much stronger than those cheap over the counter super glues you get at the supermarket. Doc Fizzix's own personal choice for all his vehicle projects.... Read More

Graphite powder is the one product guaranteed to give your mousetrap speed and/or distance project the winning edge over the competition. Pine-Pro graphite powder is a special blend of micron sized graphite particles that will reduce surface friction from 20-40%.... Read More

Doc Fizzix's revolutionary, easy-wind, snag-free, propulsion system will have your mousetrap powered and/or rubber band powered racer rocketing to the finish with mind blowing acceleration. This bulk pack gives you 100 axle hooks for all your projects.... Read More

The Essential Project Packet contains all the hard to find parts that are included in each of our mousetrap powered car and rubber band racer kits. Each packet includes 4-DVD/CD wheel Spacers, 4-thrust bearings, axle hook, and one meter of high-tech Kevlar string.... Read More

The Prefab Frame Set is made out of lightweight balsa wood that is pre-cut and pre-drilled so you can be up and running in no time at all. The Prefab Frame Set can be used for any type of vehicle project from mousetrap, rubber band, and balloon powered vehicles.... Read More

Yes! The "right" string does makes a huge difference when it comes to the performance of your mousetrap powered vehicle project. Spider Wire is an advanced string made from Kevlar fibers that is engineered to provide a superior combination of strength and durability.... Read More

Lever arm and axle set made from high quality, lightweight, brass tubing that can be cut to length. Brass tubing axles spin with less friction and no wobble compared to wooden dowels so your car will ride true and smooth. Includes a 12 inch leveram and two 6 inch axles.... Read More

One of the most basic design secret to building a record setting long distance mousetrap powered vehicle is gearing! Longer lever arms pull more string from the drive axle causing more rotations of the drive wheels. This all translates into a great linear travel distance.... Read More

The High-Tech Braking system is an advanced easiest to operate braking systems that can be easily set for any distance. A wing-nut travels along a threaded axle as the wheels rotate then wedges itself against the frame of the vehicle bring your racer to an instant stop.... Read More

A complete wheel/axle system that includes our Ultra-thin low inertia 4.75" inch wheels, brass axles, DVD/CD spacers, thrust bushings, high-tech Kevlar string, and an axle hook. Your vehicle will travel further and faster when compared to a vehicle using normal CD wheels..... Read More

Ultra thin, low-inertia wheels are half the thickness of a normal CD/DVD therefore they have only half the rotational inertia. Less rotational inertia of the wheels means your your vehicle will travel further and faster when compared to a vehicle using a normal CD wheel.... Read More

For vehicles that need good traction at the start and/or need to come to a quick, perfect stop at the finish. This set gives your wheels the traction they need to out-accelerate and to out-perform the competition. Traction treads will make your vehicle run smoother.... Read More

One of the most basic design secret for building a record setting long distance traveling mousetrap car is wheel and axle gearing. For every wrap of string that is pulled from the drive axle, our Ultra-light 11" inch wheel will travels one full meter of liner distance.... Read More

Start off your mousetrap/rubber band project in the right direction. Our rolling chassis gives you everything you need and includes our lightweight balsa frame, low inertial wheel/axle system, and easy-wind-snag-free propulsion setup. Just add your own power source..... Read More

Ultra sticky foam wheels are made from a lightweight urethane that is designed to grab the road and provide maximum traction and acceleration. While the rest of the field is spinning their wheels at the start line, your racer will be flying across the finish line.... Read More

Ultra lightweight injection molded 1 3/8 inch wheels are designed for all mousetrap and/or rubber band powered speed projects. These wheels have extremely low rotational inertia and so your vehicle will accelerate quicker and be at top speed sooner than all the rest.... Read More

The elimination of friction is the number one goal when it comes to building a recored-setting, long distance traveling, and winning mousetrap/rubber band vehicle project. Micro ball bearings are designed to replace bushings and reduce surface friction by as much as 50%.... Read More

Designed to fit perfectly inside any normal CD/DVD so it can then be used as a wheel and attached to a 3/16" inch diameter axle. Soft flexible rubber acts as shock absorbers dampening small bumps and imperfections on the course to increase both speed and distance.... Read More

Doc Fizzix's balsa wood assortment pack comes with enough wood to build several mousetrap and rubber band powered racers. Renowned for its lightweight, balsa wood is easy to cut, easy to drill, and easy to glue. It is the preferred choice by almost all top builders.... Read More

The most advanced and efficient rubber band propulsion system ever designed for propelling a rubber band powered vehicle. Doubles the power and torque causing vehicles to "rocket" off the start line with an almost unfair advantage over the rest of the competition..... Read More