MOUSETRAP POWERED CARS

The biggest challenge with all quick accelerating, high-speed, high torque, and stopping STEM vehicle contests is wheel traction. If wheels do not have enough traction, your racer will spin its wheels at the start wasting precious energy. Our Ultra-Sticky Foam Wheels wheels are manufactured specifically for Doc Fizzix Products and are the exact same wheels that were used on Doc Fizzix's own world record setting mousetrap racer that traveled 5 meters in 1.2 seconds. By far, the biggest secret to Doc Fizzix world record setting Speed-Trap racer was the use of these ultra sticky, lightweight foam urethane wheels that were essential in keeping his Speed-Trap Racer from spinning out at the start by providing maximum traction to the floor surface. Ultra-sticky foam wheels are also perfect for all controlled stopping vehicle contest were precision and accuracy of stopping is required. If you are building a quick accelerating, high-speed, high torque, and/or stopping STEM vehicle project then these ultra-sticky foam wheels are the winning secret. While the rest of the competition is spinning their wheels at the start line your racer will be rocketing across the finish line in record time. Ultra sticky foam wheels are 2" inches in diameter by 0.75 inches thick and machined to fit a 5/32" inch axle.

Includes our lightweight, 6" inch x 5/32" inch diameter brass tubing axles that spin with less friction and will not warp like wood dowels used by many of our competitors in their kits. Our Ultra Sticky Foam Wheels and Axle setup will have your vehicle traveling smoother with less wobble and less wasted energy for an increase in both speed and travel distance.

Top Highlights:

• Save time and money when you order in bulk. Complete 10-pair of Ultra Sticky Foam Wheels & Axles. Ideal for your next large group STEM project based activity.
• While the rest of the competition is spinning their wheels at the start line, our Ultra Sticky, low inertia Foam Wheels will have your racer rocketing across the finish line in record time.
• Same foam wheels that were used on Doc Fizzix's own world record setting mousetrap speed-trap racer that traveled 5 meters in 1.2 seconds.
• Our ultra sticky, low inertia foam wheels are made from a very sticky lightweight urethane that is designed to grab any floor surface creating maximum traction while generating rocket accelerations.
• Ultra-sticky foam wheels will work with all controlled stopping STEM vehicle contest were precision and accuracy of stopping is required.
• Comes with lightweight, 6" inch x 5/32" inch diameter brass tubing axles that spin freely with less friction for an increase in both speed and distance. Brass tubing axles do not warp like wooden dowels and provide for a much smoother ride without wobble.
• Designed for all vehicle projects that require large accelerations including mousetrap cars, rubber band racers, balloon vehicles, and/or all other STEM vehicle projects.
• 2" inches outer diameter x 0.75" inch thick. Fits a 5/32" diameter axle.
• All our products are 100% made in the U.S.A by Doc Fizzix in Spicewood, TX.

Includes the following:

• 40x - Ultra-stick, foam wheels
• 20x - 6" inch Brass tubing axles
• 40x - thrust washers

Size : 2" inch diameter wheel, 6" inch brass axle.

Weight : 2.0 oz.

Record Setting Design

The Ultra-stick, foam wheels are the same wheels used on Doc Fizzix's own record-setting mousetrap racer that traveled 5 meters in 1.2 seconds. The biggest challenge with all high-speed and high torque contests is wheel traction. If wheels do not have enough traction, your racer will spin its wheels at the start wasting precious energy. The Speed-Trap Racer comes with two ultra sticky, low inertia foam wheels that are made from a very sticky lightweight urethane that is designed to grab any floor surface creating maximum traction while generating rocket accelerations. While the rest of the competition is spinning their wheels at the start line your Speed-Trap racer will be flying across the finish line in record time.

Our Ultra-Sticky Foam Wheels wheels are manufactured specifically for Doc Fizzix Products and are the exact same wheels that were used on Doc Fizzix's world record setting mousetrap racer that traveled 5 meters in 1.2 seconds. By far, the biggest secret to Doc Fizzix world record setting Speed-Trap racer was the use of these ultra sticky foam wheels that were essential in keeping his Speed-Trap Racer from spinning out at the start line by providing maximum traction to the floor surface. Ultra sticky foam wheels are 2 inches in diameter and machined to fit a 5/32 inch axle

Same Day Shipping!

All orders received before 12:00 p.m. CST are processed and ship on the same day as long as the item(s) are in stock; orders received after 12:00 p.m. CST will be processed and shipped on the following business day as long as the item(s) are in stock. Online orders take priority over phone and mail orders and therefor ship with a priority level of Burning-Red-Hot. Because of the extreme popularity of Doc Fizzix Products, items can go out of stock without warning. If an item goes out of stock, it will ship as soon as the item is back in stock with a priority level of Super-Duper-Burning-Red-Hot.

** OUR SERVICE PROMISE TO YOU **

** All in-stock orders placed before 12:00 p.m. CST ship same day **

** Shipments are Monday through Friday **