MOUSETRAP POWERED CARS

The Jones Pulley System is a new and revolutionary propulsions system that does not use a lever arm but instead uses a pulley attached to the mouse trap's spring that is designed to maximize the winding of a mouse trap's spring by more then the traditional 180 degrees. By far The Jones Pulley Dragster is the fastest mousetrap racer you can build but it may not be legal for all mousetrap vehicle contest because it modifies the mouse trap to wind more than the traditional 180 degrees. The Jones Pulley system is designed to give this mousetrap racer as much as 100% more power and then keep that power pulling up to 50% longer than other traditional propulsion systems. The Jones Pulley system gives this racer an almost unfair advantage as it "rockets" off the start line with an unparalleled explosive acceleration. The Jones Pulley Dragster is high torque generating mousetrap powered car that is perfect for all speed and king-of-the-hill contest that allow for the modification of the mouse trap's spring. The Jones Pulley Dragster takes more work to build than other mousetrap racer kits and is designed for those individuals who have had experience building similar projects using hand tools. This kit requires some cutting and drilling by the builder.

Developed by one of the finest minds in the mousetrap vehicle world, the Jones Pulley System is a new and revolutionary way to harness the energy of a mouse trap spring and increase the output torque. The Jones Pulley Dragster will double the power output of any mouse trap causing your racer to "rocket" off the start line. The Jones Pulley Dragster can be assembled in less than 90 minutes for most experienced builders and when finished will travel 5 meters in less than 1 second.

Important!

The Jones Pulley Dragster will allow the mousetrap to wind more than the traditional 180 degrees. This kit may not be legal for all competitions.*

Travel Speed:

• 5 meters in less than 1 second*

Top Highlights:

• An all new and revolutionary propulsions system that does not use a lever arm but instead uses a pulley attached to the mousetrap's spring that is designed to maximize the winding of a mouse trap's spring by more then the traditional 180 degrees.
• The Jones Pulley system is designed to give this mousetrap racer as much as 100% more power and then keep that power pulling up to 50% longer than other traditional propulsion systems.
• Comes with our ultra-sticky foam wheels for maximum wheel traction capable of generating rocket accelerations.
• While the rest of the competition is spinning their wheels at the start line, our Ultra Sticky, low inertia Foam Wheels will have your racer rocketing across the finish line in record time.
• Features Doc Fizzix's "easy-wind", "snag-free" propulsion system designed specifically for mousetrap powered racers.
• Comes with our complete step-by-step instruction guide that is written the for the visual learner filled with tons of top secret performance tips and tricks.
• Finished vehicle measures approximately 4.5" x 5" x 10.5" inches (H x W x L)
• All our products are 100% made in the U.S.A by Doc Fizzix in Spicewood, TX.

Skill Level:

Required Skills

• Able to measure with a ruler in both inches and/or centimeters.
• Experience working with wood glue and/or Cyanoacrylate glues (Super Glues).
• Able to glue two pieces of balsa wood together.
• Able to tie a loop knot in string.
• Able to use needle nose pliers to cut wire.

Recommended Skills

• Some knowledge of how a mousetrap car works.
• Able to sand parts to make them smooth.
• Can problem solve during construction and make adjustments.
• Can determine how to make adjustments to improve performance.

Tools required:

• Needle-nose-pliers
• Super glue
• band saw or jewelers saw
• hand drill

*Kits require assembly, actual results will vary and depends on the constructions skills of the builder, glue and tools not included.

Includes the following:

• 1x - Launch Pulley Set-up and System
• 1x - Victor mouse trap
• 2x - Balsa wood sides
• 2x - Ultra Sticky foam wheels
• 2x - Low inertia front wheels
• 2x - Front and Rear Brass tubing axles
• 18 inches Kevlar high-tech string
• Doc Fizzix's easy-wind, snag-free propulsion system
• Step-by-step plans with performance tips and tricks

Extreme Torque Jones Pulley System

Developed by one of the finest minds in the mousetrap vehicle world, the Jones Pulley System is a new and revolutionary way to harness the energy of a mouse trap spring and increase the output torque. The Jones Pulley Dragster does not use a lever arm but instead uses a pulley attached to the mouse trap's spring that is designed to maximize the winding of a mouse trap's spring by more then the traditional 180 degrees. With this revolutionary system, you will double the power output of any mouse trap causing your racer to "rocket" off the start line. The Jones Pulley Dragster takes more work than normal kits but can be assembled in less than 90 minutes for most experienced builders and when finished will travel 5 meters in less than 1 second. The Jones Pulley System may not be legal for all contest to make sure you check your contest rules and requirements.

Ultra-Sticky Foam Wheels

The biggest challenge with all high-speed racers and high torque contests is wheel traction. If wheels do not have enough traction, your racer will spin its wheels at the start wasting precious energy. The Jones Pulley Dragsterr comes with two ultra sticky, low inertia foam wheels that are made from a very sticky lightweight urethane that is designed to grab any floor surface creating maximum traction while generating rocket accelerations. While the rest of the competition is spinning their wheels at the start line your Speed-Trap racer will be flying across the finish line in record time.

Our Ultra-Sticky Foam Wheels wheels are manufactured specifically for Doc Fizzix Products and are the exact same wheels that were used on Doc Fizzix's world record setting mousetrap racer that traveled 5 meters in 1.2 seconds. By far, the biggest secret to Doc Fizzix world record setting Speed-Trap racer was the use of these ultra sticky foam wheels that were essential in keeping his Speed-Trap Racer from spinning out at the start line by providing maximum traction to the floor surface. Ultra sticky foam wheels are 2 inches in diameter and machined to fit a 5/32 inch axle

Easy-wind, snag-free propulsion system

As with all our top mousetrap racer kits, The Jones Pulley Dragster Kit includes our "easy-wind" and "snag-free" string release system that will not tangle and/or snag on release for increased performance, a technique developed exclusively by Doc Fizzix for mousetrap and rubber band powered racers. Our snag-free propulsion system is designed to release from the drive axle once the pulling force is complete in order to maximize the coasting distance.

Easy to Follow, Step-by-Step Instructions

As with all our mousetrap vehicle kits, The Jones Pulley Dragster Kit comes with our complete step-by-step instruction guide that is written the for the visual learner filled with tons of top secret performance tips and tricks that have been developed, tested, and perfected exclusively by Doc Fizzix, with over 30 years of experience, so you will have all the information you need to make your mousetrap vehicle project a success. Our easy to follow, step-by-step instructions are filled images and diagrams designed to eliminate the guess work. You will feel confident and feel like a professional builder as you follow our detailed step-by-step instructions.

Same Day Shipping!

** OUR SERVICE PROMISE TO YOU **

• All orders received before 12:00 p.m. CST are processed and ship on the same day for all in stock item(s). Orders received after 12:00 p.m. CST will be processed and shipped on the following business.
• Expedited and over night shipping options available at checkout.
• We provide tracking numbers for all online orders. As soon as your order is shipped, you will receive a shipping confirmation email that includes your tracking number.
• All orders over $100.00 USD ship domestic ground for free.
• If an item does go out of stock, it will ship as soon as the item is back in stock. We are the manufacture for all products we sell so when an item does go out of stock we simply make more.
• Packages are shipped Monday through Friday.