mousetrap powered car kit

Doc Fizzix Products Home
The Wrangler
mousetrap vehicle kits | item number: KMTV109DF

The Wrangler ™ Mousetrap Car Kit

Online Price: $19.95

Availability: This item is currently in stock

email  Email this page to yourself or a friend


The Wrangler is an easy to build long distance traveler that illustrates one of the most basic design concepts for achieving extreme travel distances, lever arm length. A longer lever arm means that more string can be wound around and pulled from the drive axle translating into greater travel distance. The Wrangler is built on our top selling Basic Kit chassis. The Wrangler comes ready-to-assemble with pre-cut and pre-drilled parts so you can be ready for action and racing on the same day. As with all our kits, The Wrangler comes with step-by-step instructions that are filled with tons of top secret performance tips and tricks that have been developed exclusively by Doc Fizzix so that you will have all the information you need to make The Wrangler a winner.


  • Light-weight balsa wood
  • Brass tubing axles
  • 15-inch lever arm
  • Pre-cut and pre-drilled
  • Low inertia DVD layer wheels
  • Doc Fizzix's easy-wind, snag-free propulsion system
The Wrangler can be assembled in less than 30 minutes for most first time builders and when finished it will travel from 40-55 meters. But the single best upgrade is the 15-inch long lever arm that pulls almost one meter of string pulled from the drive axle. The total pulling distance for The Wrangler is about 30 meter before the vehicle begins coasting; that is over 250% more pulling distance compared to other mousetrap vehicles.

As with all our top mousetrap racer kits, The Wrangler includes our "easy-to-wind" and "snag-free " string release system that will not tangle or snag for increased performance, a technique developed exclusively by Doc Fizzix.

Travel distance:

  • 40-55 meters (131 - 180 feet)*

Kit includes the following:

  • Victor mouse trap
  • Kevlar high-tech string
  • Pre-cut and pre-drilled balsa wood frame
  • Low inertia DVD layer wheels
  • DVD wheel adapters
  • Brass tubing axles
  • Thrust washers
  • 15" lever arm
  • Doc Fizzix's easy-wind, snag-free propulsion system
  • Step-by-step plans with performance tips and tricks

Tools required:

  • Needle-nose-pliers
  • Super glue
Size : length = 21 inches, width = 6 inches, lever arm = 12 inches.

Weight : 6.3 oz.

mouse trap car mouse trap car mouse trap car *Kits require assembly, actual results will vary, glue and tools not included.

print  Print This Page

Phone Hours: Mon. - Fri. 10:00 a.m. - 5:00 p.m. (CST) - 866-362-3499 (US only) or 512-218-0454
Doc Fizzix Products, P.O. Box 5507, Round Rock TX 78683, U.S.A.