mouse trap project supplies

Not a kit, but a collection of all the hard-to-find parts and accessories in one package. Perfect for those who cannot use a kit and/or for those wanting to design and build their own mouse trap racer from scratch. Includes a top secrets builders guide filled with performance tips and tricks.... Read More

Victor is the standard among mouse traps and the only choice when it comes to building record setting mouse trap powered racers. Because mouse traps do make a difference when it comes to performance, make sure you go with the only trusted brand among all top mouse trap car builders..... Read More

Graphite powder is the one product guaranteed to dramatically increase both the speed and the travel distance of any mouse trap racer. Pine-Pro graphite powder is a special blend of micron sized particles that will reduce surface friction from 20-50% and give your racer the winning edge.... Read More

DVD-Layers are half as thick as a normal CD/DVD and therefore they have half the rotational inertia. Vehicles that use DVD layers for wheels instead of regular CD will have a greater acceleration and a greater travel distance. By using DVD-layers travel distance will increase by 5-15 meters.... Read More

JET Super glue is the best all-purpose super glue available and Doc Fizzix's own personal choice for all his projects. JET super-glue is a very fast drying cyanoacrylate super glue that dries much stronger than those cheap over the counter super glues you get at the supermarket.... Read More

Eliminating friction is the goal when it comes to building a successful and winning mousetrap car. Micro ball bearings are designed to replace bushings and will reduce the surface friction by as much as 50%. Micro bearings are for those individuals who want to set a new school record.... Read More

The Formula Perfect wheel inserts are manufactured to the highest level of precision possible. A wobbly wheel will cause poor performance, formula perfect wheel inserts eliminate wheel wobble. Will fit perfectly inside any CD and/or DVD so that it can be press fit on a 3/16 inch axle..... Read More

Wheel spacer are designed to fit perfectly inside the hole of a normal CD/DVD so then it can be attached to a standard sized 3/16 inch brass axle. These spacers can also be used to center an axle between the frame in order to cut down on the side-to-side play and movement of an axle.... Read More

Ultra light weight injection molded wheels designed for all mousetrap and/or rubber band powered racers. These wheels have extremely low rotational inertia and so your vehicle will accelerate quicker and be at top speed sooner than the rest. The set includes 4 wheels and two 6" axles.... Read More

Ultra sticky foam wheels are made from a lightweight urethane that is designed to grab the road and provide maximum traction and acceleration. While the rest of the field is spinning their wheels at the start line, your racer will be flying across the finish in world record time.... Read More

The "right" string makes a huge difference in the performance of a mousetrap powered vehicle. In this set you get two 6-inch and two 12-inch brass lever arms, and 2 meters of Spider-Wire string made from Kevlar fibers for maximum strength and performance.... Read More

The Jones Pulley system is designed to maximize the winding of a mousetrap's spring by more then the traditional 180 degrees. With this revolutionary system, you will double the power output of any mousetrap causing your racer to "rocket" off the start line.... Read More

The Prefab Frame is made out of lightweight balsa wood that is pre-cut and pre-drilled for a perfect fit and a perfect alignment. This prefab frame set can be used to build any style of vehicle including: distance travelers, speed dragsters, power pull, and more. Comes with enough for 2 kits.... Read More

Wood assortment pack comes with enough wood to build several mouse trap powered racers. Lightweight balsa wood is easy to work with and is the preferred choice by top builders. It can be used for an endless list of projects from bridges, towers, rubber band cars, balloon car, and more.... Read More

This is the same pulley set-up as used on Doc Fizzix's world record setting mousetrap distance car that traveled 180 meters. This unique pulley system is designed to maximize the transfer of potential energy over a 400% greater pulling distance than conventional propulsion systems.... Read More